Reference

AIS navigation status codes

“Under way using engine”, “at anchor”, “moored”, “not under command”: the navigational status is the most human field in an AIS broadcast. A person sets it, a person forgets to change it, and a good deal of what a ship tracker tells you — including our arrival and departure alerts — depends on it.

Last reviewed

What the status is

Every position report from a Class A transponder includes a number from 0 to 15, the navigational status. The terms come from the international collision regulations, where a vessel’s status decides which lights she shows and who gives way to whom. AIS simply lets her say it by radio as well.

Unlike position, speed and course, the status is not measured by anything. It is selected on the transponder’s keypad by whoever is on watch, and it stays at that value until someone selects another. Class B transponders do not send a status at all.

The 16 codes

The label is the one VesselTrack displays. The coloured pill is how the status appears on a vessel page.

0Under way using engineMap filter: Under way
A power-driven vessel that is not anchored, moored or aground. It is the status most ships show most of the time — including ships drifting with the engine stopped, because in the collision regulations “under way” only means not at anchor, not made fast to the shore and not aground.
1At anchorMap filter: At anchor· drawn as a dot
The anchor is down. Expect a slow circle on the track as the ship swings with wind and tide. A Class A transponder at anchor reports its position every three minutes instead of every few seconds.
2Not under commandMap filter: Restricted
An exceptional circumstance — typically an engine or steering failure — has left the vessel unable to manoeuvre and keep out of the way of others. It does not mean nobody is in charge.
3Restricted manoeuvrabilityMap filter: Restricted
The work the vessel is doing limits how she can manoeuvre: laying cable or pipe, dredging, surveying, servicing a buoy, transferring cargo or people under way, or a difficult tow.
4Constrained by her draughtMap filter: Restricted
A power-driven vessel so deep in the water, relative to the depth and width of the channel, that she can barely deviate from her course. Used by deep-draught ships in confined channels.
5MooredMap filter: Moored· drawn as a dot
Made fast to a berth, pier or mooring buoy. With “at anchor”, this is one of the two statuses VesselTrack treats as stopped.
6AgroundMap filter: Aground
The vessel is resting on the seabed. Rare, and when it is real it is usually an incident — but it is also set by mistake, so check the speed and the track.
7Engaged in fishingMap filter: Fishing
Fishing with nets, lines or trawls that restrict manoeuvrability. A boat trolling lines that do not restrict it is not “engaged in fishing” in this sense.
8Under way sailingMap filter: Under way
Under sail alone. A sailing vessel using her engine is a power-driven vessel and should show status 0.
9Reserved for HSC
Not a status a ship should send: the code is held in reserve for a future status for high-speed craft and certain ships carrying dangerous goods.
10Reserved for WIG
Not a status a ship should send: the code is held in reserve for a future status for wing-in-ground craft and certain ships carrying dangerous goods.
11Power-driven vessel towing astern
A tug towing behind her. The standard marks this code for regional use, so many tugs show 0 or 3 instead.
12Power-driven vessel pushing ahead or towing alongside
A tug pushing ahead or towing alongside. Also marked for regional use.
13Reserved for future use
Unassigned.
14AIS-SART, MOB-AIS, EPIRB-AIS
Not a ship at all: an active AIS search-and-rescue transmitter, man-overboard beacon or AIS-equipped emergency beacon. These devices transmit a position with this status so that nearby ships can home in on them.
15Not defined (default)
The transponder’s default: nobody has set a status. Common on vessels whose crew never touch the setting. Beacons under test also use it.

Why it is so often wrong

Changing the status is one small task among many when a ship arrives or sails, and nothing on board complains if it is skipped. The results are familiar to anyone who watches AIS:

  • a ship alongside for two days still showing “under way using engine”;
  • a ship doing 14 knots in open water showing “moored” from her last port;
  • a status of “not defined (default)” on a vessel whose crew have never set one — 15 is what the field holds until someone does;
  • a status changed an hour before letting go, or an hour after anchoring.

So read the status together with the speed and the track. Speed and position come from the ship’s instruments; if they disagree with the status, believe the instruments.

How VesselTrack uses it

The marker

On the map, a vessel reporting “at anchor” or “moored” is drawn as a dot rather than an arrow, whatever its speed. So is any vessel slower than 0.5 knots, whatever its status. See markers: arrows and dots.

The map filter

The Status filter groups the codes people actually search for:

  • Under way — codes 0, 8
  • At anchor — code 1
  • Moored — code 5
  • Fishing — code 7
  • Restricted — codes 2, 3, 4
  • Aground — code 6

Codes outside these groups, including the default 15, are not matched by any status filter. A ship that has never set a status will not appear under “Under way”, however fast she is going; filter by speed instead.

Port pages

A port page lists vessels “in port” and “expected”. Both lists lean on speed first and status second, so that a forgotten status does less damage:

  • In port means within 10 km of the port’s position and stopped: slower than 0.5 knots, or reporting “moored” or “at anchor” with a speed under 2 knots or no speed at all.
  • Expected means bound for the port and under way: making at least 0.5 knots and not reporting “moored”, “at anchor” or “aground”.

The details of how a vessel is tied to a port are in Destinations, ETAs and UN/LOCODEs.

Arrival and departure alerts

Three of the alert rules you can set on a vessel in your fleet are driven directly by the status, and it is worth knowing exactly when they fire:

  • Arrival. The vessel reports it has moored or anchored. Precisely: the status changes to “moored” or “at anchor” from anything else. Shifting from the anchorage to a berth does not raise a second arrival, because the vessel was already stopped.
  • Departure. The vessel gets under way after being moored or at anchor. Precisely: the status changes from “moored” or “at anchor” to “under way using engine” or “under way sailing”.
  • Navigation status change. Any change of reported status, e.g. under way → restricted manoeuvrability.

A status of “not defined (default)” is treated as no information: it neither raises an alert nor counts as the previous status when the next real one arrives.

The consequence is plain. These alerts tell you when the crew say the ship has arrived or sailed. A master who sets “moored” as the last line goes ashore gives you a precise arrival time; one who never changes the status gives you no alert at all.

If you need something that does not depend on anyone pressing a button, use position instead: draw an alert area around the port or its approaches and be alerted when the vessel crosses the line. The alerts guide works through both approaches.

Sources

Statements about AIS and maritime standards on this page were checked against the following. Statements about what VesselTrack does describe the software as it runs today.

Found a mistake? Email support@vesseltrack.net or see how to contact us. Corrections are made on this page and the review date is updated.