Explainer
How AIS ship tracking works
Every ship on a tracking map is there because it is broadcasting its own position by radio and somebody on shore is listening. Once you know what is sent, how often, and how far the signal carries, the odd things you see on any ship tracker — vessels that vanish, positions that are hours old, misspelt destinations — stop being mysteries.
Last reviewed
What AIS is
AIS, the Automatic Identification System, is a VHF radio system. A transponder on the ship takes the position from a satellite-navigation receiver, the heading from the compass, and a few details the crew have typed in, and broadcasts them over and over without anyone having to press a button. Every other ship in radio range receives the broadcast and can plot the sender on its own displays. That is the point of the system: it was built so that ships can see and identify each other, and so that coastal authorities can see them.
Carrying it is compulsory for most commercial shipping. The International Maritime Organization’s SOLAS convention requires AIS on all ships of 300 gross tonnage and upwards on international voyages, on cargo ships of 500 gross tonnage and upwards that stay in domestic trade, and on every passenger ship whatever its size. Many smaller vessels fit it voluntarily.
The broadcasts are not encrypted and not addressed to anyone in particular. Anyone with a suitable receiver and antenna near the coast can pick them up, and networks of such receivers are what ship-tracking websites are built on. Nothing is being intercepted; the ships are announcing themselves.
Class A and Class B transponders
There are two families of shipborne transponder. Class A is the full specification that ships under the carriage rules must fit. Class B is a cheaper, lower-powered unit that works alongside Class A but says less, less often.
| Property | Class A | Class B |
|---|---|---|
| Carried by | Ships that are required to carry AIS. | Smaller vessels that are not: typically yachts, small fishing boats and workboats. |
| Transmit power | 12.5 watts | 2 watts (5 watts for the more capable “SO” units) |
| Position report | Every 2 to 10 seconds when moving, depending on speed and whether the ship is turning; every 3 minutes at anchor or moored. | Every 30 seconds above 2 knots for the common “CS” units; every 3 minutes at 2 knots or less. |
| Identity and voyage data | Every 6 minutes: name, call sign, IMO number, ship type, dimensions, draught, destination and ETA. | Every 6 minutes: name, call sign, ship type and dimensions. No IMO number, draught, destination or ETA. |
| Navigational status | Sent with every position. | Not sent. |
The practical consequence: a large ship near a receiver produces a dense, detailed trail, while a yacht with a Class B set produces a sparse one, transmits at a fraction of the power, and never tells you where it is going.
What is broadcast, and how often
A Class A ship sends two kinds of message on its own schedule.
The position report
This is the frequent one. It carries the ship’s MMSI (its radio identity), latitude and longitude, speed over ground, course over ground, heading, rate of turn and navigational status. How often it is sent depends on how quickly the picture is changing:
| What the ship is doing | Class A position report |
|---|---|
| At anchor or moored | Every 3 minutes |
| Under way at up to 14 knots | Every 10 seconds |
| 14 to 23 knots | Every 6 seconds |
| Faster than 23 knots | Every 2 seconds |
| Altering course | About every 3 seconds |
Position, speed and course come straight from the navigation receiver, and the heading from the compass. The navigational status does not: someone on the bridge has to change it, which is why it is so often wrong (see navigation status codes).
Static and voyage data
Every six minutes the ship also sends who it is — name, call sign, IMO number, ship type and dimensions — and what the crew say about the voyage: destination, ETA and draught. The identity is programmed when the set is installed. The voyage fields are typed by hand, limited to 20 characters for the destination, and follow no enforced format.
Because this message is so much rarer than the position report, a tracker usually hears a ship’s position several times before it learns the ship’s name. A marker that shows only a number for its first few minutes is normal.
Each field also has a reserved value meaning “not available” — a heading of 511, a speed of 102.3 knots, a latitude of 91°. A ship with no compass input really does broadcast heading 511. A well-behaved tracker shows that as missing rather than as a number.
Who hears it: shore stations and satellites
VHF radio travels more or less in a straight line, so range is set by the height of the two antennas above the curve of the Earth. The US Coast Guard gives a nominal 20 nautical miles between ships at sea. A shore receiver on a hill or a tall mast hears further — elsewhere on this site we use “roughly 40 nautical miles” as a rule of thumb — but the order of magnitude does not change. It is tens of miles, not hundreds.
This is the single most useful thing to understand about a ship tracker fed by shore stations (terrestrial AIS). A ship crossing an ocean is tracked in detail until it is a few tens of miles offshore, then nothing arrives for days, then it reappears as it closes the far coast. Nothing has gone wrong and the ship has not switched anything off. It was simply out of earshot. The same happens along any coast where nobody has put up a receiver.
The gap can be filled from orbit: the AIS standard includes a message designed for long-range reception, typically by satellite. That is satellite AIS, and it is a separate source of data from the shore network.
Why a position can be late or wrong
- The ship is out of range. By far the commonest reason. The position shown is the last one received, and the honest thing a tracker can do is show its age.
- The transponder is off or faulty. Ships fitted with AIS are required to keep it running, with exceptions where international rules protect navigational information — but sets fail, and some are turned off.
- The crew typed it. Destination, ETA, draught and navigational status are manual. A ship under way with the status “moored”, or bound for the port it left last week, is an everyday sight.
- The identity is wrong. Transponders are sometimes programmed with a placeholder MMSI such as 123456789, or with another ship’s number. Two ships sharing a number look like one ship jumping between two places.
- The position source is degraded. AIS reports whatever the ship’s navigation receiver says, with a single flag for whether the fix is better or worse than 10 metres.
- Someone is transmitting false data. AIS has no authentication. The US Coast Guard’s own advice is to “trust, but verify”.
- The tracker adds its own delay. Messages are relayed, stored and published in steps. No website shows the instant a message was sent.
None of this makes AIS useless; it makes it a system to be read with its limits in mind. It is also why no ship tracker, this one included, should be used to navigate.
What VesselTrack receives
Specifically, for the map and pages on this site:
- Shore-based reception only. Our positions come from a feed supplied by AISstream.io, which aggregates a network of AIS receiving stations. We do not use satellite AIS. Coverage is good near coasts, ports and straits that have a receiver, and absent on the open ocean.
- Class A ships. We subscribe to the position reports and the static and voyage data that Class A transponders send (AIS messages 1, 2, 3 and 5). Class B reports, aids to navigation and base stations are not collected.
- A picture a minute or two old. Incoming positions are written to our database in batches about every 30 seconds, and the live map reloads vessels every 60 seconds. “Live” on this site means that, not instantaneous. Every vessel shows the age of its position.
- The last 24 hours. The map draws vessels heard within the last 24 hours. A marker fades once its position is more than an hour old.
- 30 days of track. We store at most one track point per vessel every five minutes, and delete points after 30 days. Anyone can see the last 24 hours of a vessel’s track; the full 30 days is part of Pro.
- Missing values shown as missing. A heading of 511 or a speed of 102.3 knots is displayed as “not reported”.
- An honest offline state. If no position from any vessel has arrived for 30 minutes, the site says the AIS feed is offline and shows every vessel where it was last heard, with the time. No alerts are produced until the feed returns.
To see what that means for the waters you care about, open the map there, or look up a port in the port directory. A busy port with no vessels listed is almost always a coverage gap, not an empty harbour.
Sources
Statements about AIS and maritime standards on this page were checked against the following. Statements about what VesselTrack does describe the software as it runs today.
- US Coast Guard Navigation Center — Types of AISClass A, Class B, AIS-SART, base stations and aids to navigation, and how often each reports.
- US Coast Guard Navigation Center — Shipborne AIS class comparison (PDF)Transmit power and position-reporting intervals for Class A, Class B-SO and Class B-CS.
- US Coast Guard Navigation Center — Class A AIS position report and static/voyage dataField-by-field contents of AIS messages 1, 2, 3 and 5, reproduced from Recommendation ITU-R M.1371-5: navigational status codes, ship-type codes, “not available” values.
- US Coast Guard Navigation Center — How AIS worksVHF range (nominally 20 nautical miles at sea, depending on antenna height) and how stations share time slots.
- US Coast Guard Navigation Center — AIS messagesThe list of AIS message numbers, including message 27 for long-range (typically satellite) reception.
- US Coast Guard Navigation Center — AIS frequently asked questionsWhy names arrive later than positions, invalid MMSIs, and that AIS is unencrypted and can be spoofed.
- International Maritime Organization — AIS transpondersWhich ships must carry AIS under SOLAS regulation V/19.
- AISstream.io — documentationThe message types offered by the feed our collector subscribes to.
- ITU — Recommendation ITU-R M.1371 (technical characteristics of AIS)The AIS standard itself. We checked its tables as reproduced by the US Coast Guard Navigation Center pages listed here.
Found a mistake? Email support@vesseltrack.net or see how to contact us. Corrections are made on this page and the review date is updated.