How-to

How to track a cruise ship or ferry

Every passenger ship must carry AIS, so cruise ships and ferries are among the easiest vessels to follow — near land. This guide shows how to find one, why a cruise ship can vanish for a day or two between ports while a coastal ferry rarely does, and how to read the destination, ETA and port calls you see for it.

Last reviewed

Cruise ship or ferry? AIS cannot tell

The SOLAS convention requires AIS on all passenger ships “irrespective of size”, so a ferry or cruise ship you are looking for should be transmitting. What the transponder does not say is what kind of passenger ship it is. Its ship type is a two-digit code, and the passenger codes, 60–69, cover cruise liners, car and train ferries, harbour ferries and sightseeing boats alike; the second digit is about dangerous cargo, not about the kind of service (see AIS ship types).

PropertyCruise shipFerry
Ship type broadcastPassenger, 60–69Passenger, 60–69; many fast ferries use high-speed craft, 40–49
Where it sailsBetween ports days apart, often across open seaFixed routes, usually within sight of land
Coverage by shore receiversGood in port and near coasts; gaps on sea daysUsually continuous on coastal routes
Destination fieldUsually the next port of callThe next terminal, the route, or left unchanged between crossings

So a list of passenger ships mixes the two, and many fast ferries are listed among high-speed craft instead. To find a particular ship, search for her by name or number rather than browsing.

Finding the ship

Search for the ship’s name in the search box on the live map. Cruise lines often give their ships family names that differ by one word, so check the result’s type and flag, and if you can, confirm with the IMO number, which cruise lines and ship registers publish and which never changes. AIS names have no accents and are at most 20 characters long, so a long name may be cut short in the broadcast.

The vessel page shows the latest position and when it was received, speed, course, the declared voyage, and the track of the last 24 hours. Bookmark it, or add the ship to your fleet so she is ringed on the map. The guide to finding a ship has more ways to search.

Why a cruise ship drops off the map at sea

Positions on a tracker like this one come from receivers on shore, which hear ships out to a few tens of nautical miles (see how AIS reception works). A cruise ship on a sea day — crossing between islands, or from one coast to another — is often well beyond that. Her position stops updating, her marker fades and the vessel page shows how long ago she was last heard. Nothing has happened to the ship; she is out of earshot, and she reappears as she approaches the next port.

To estimate where she is in between, use the last position, the speed and course she was making and her declared destination and ETA. A ship last heard at 18 knots heading for a port 400 nautical miles away will be about 22 hours out. If she has been silent much longer than the passage should take, the guide to disappearing ships walks through the other possible reasons.

Ferries: short routes, steady coverage

Ferries are the opposite case. Most run fixed routes close to land, between ports where receivers are common, and a passenger ferry makes the same crossings day after day. Where there is a receiver in range of the route, a ferry is followed from berth to berth with no gap, and her track draws the route itself.

Two things are less reliable. The destination field may name the next terminal, the route as a pair of places, or be left unchanged between crossings. And the navigational status may stay at “under way” while the ferry sits at her berth between sailings. For a ferry, the measured speed and the position are the facts to rely on; a speed near zero at the terminal means she is alongside whatever the status says.

Reading the destination and ETA

Both are typed by the crew. The destination is up to 20 characters of free text — a port name, an abbreviation or a UN/LOCODE such as ESBCN for Barcelona — and VesselTrack shows it as broadcast and, where it can, matches it to a port page. The ETA is the crew’s own estimate in UTC, without a year, labelled “crew-entered” wherever it appears.

On a cruise ship the destination is usually the next port of call. The ETA is the time the crew expected when they typed it, which may be before a change of plan or a slow passage. Convert from UTC to local time before comparing it with an itinerary: an ETA of 06:00 UTC is breakfast time in Lisbon and the middle of the night in Miami. The destinations and ETAs guide explains how destinations are matched to ports and how the ETA’s year is worked out.

Port calls and cruise ports

Each port in the port directory has a page listing the vessels in port now, the expected arrivals that declare it as their destination, and the arrivals and departures recorded in the last 7 days. For a cruise port that is a quick way to see which ships are alongside today and which are on their way. An arrival is recorded when a vessel is seen stopped close to the port, so a cruise ship anchored off a port and using tenders may be recorded or not, depending on how far out she anchors.

If you want to be told rather than check, Pro adds an arrival alert that fires when a ship in your fleet reports herself at anchor or moored, by email, in the app or by webhook (see tell me when my vessel arrives).

Following a cargo ship instead? See how to track a container ship.

Sources

Statements about AIS and maritime standards on this page were checked against the following. Statements about what VesselTrack does describe the software as it runs today.

Found a mistake? Email support@vesseltrack.net or see how to contact us. Corrections are made on this page and the review date is updated.