How-to
How to find a ship by name, IMO number, MMSI or call sign
Finding a ship on a tracker is easy when you have the right number and confusing when you only have a name. This guide explains which identifier to use, the quickest ways to look a vessel up on VesselTrack — the search box, the lookup tools, port pages and the browsable lists — and what it means when a ship you are sure exists does not turn up.
Last reviewed
Four ways to name a ship
A ship broadcasting AIS identifies herself in up to four ways. They are not interchangeable: some stay with the ship for ever and some change whenever she is sold or re-registered.
| Identifier | Unique? | Changes |
|---|---|---|
| IMO numberSeven digits, often written “IMO” and the number | Yes, for the life of the hull | Never |
| MMSINine digits; a ship’s starts with 2 to 7 | Meant to be, at any one time | Usually when the ship changes flag |
| Call signA short mix of letters and digits | Within the radio licensing system | Usually when the ship changes flag |
| NameUp to 20 characters as broadcast, in capitals | No — many ships share a name | When the ship is renamed, often on sale |
If you have the IMO number, use it. It is assigned to the hull and never reused, so it finds the same ship whatever she is called today and whichever flag she flies. Most seagoing merchant ships have one; fishing boats, yachts and small workboats often do not (see which ships have an IMO number).
Otherwise use the MMSI, the number every AIS message is signed with — the most direct match there is on a tracker, though it normally changes when a ship changes flag. The call sign behaves the same way. A name is the least reliable: there are many ships called “Ocean Star”, names are re-used, and a ship can be renamed overnight. Treat a name search as a shortlist, then confirm with a number.
Searching from the map
The search box at the top of the live map takes all four identifiers, and port names and UN/LOCODEs as well. Type at least two characters:
- Digits are matched against MMSIs and IMO numbers, exactly first and then as the start of a number, so a partial MMSI still narrows the list. Pasting
IMOorMMSIin front of the number is fine; the label is ignored. - Letters are matched against call signs and names — exact matches first, then names that start with what you typed, then names that contain it — and finally against the destination ships broadcast, so typing a port name also finds ships bound there.
- Case does not matter, but accents do. AIS names are broadcast in a restricted character set with capital letters and no accents, so search for
SOFIA, not “Sofía”.
Each result shows the vessel’s type and flag and the identifier it matched on, which is how you tell two ships of the same name apart. Choosing one flies the map to it and opens its panel; from there you can open the full vessel page, which has its own address — /vessel/ followed by the IMO number, or the MMSI for a vessel without one — that you can bookmark or share.
The lookup tools
If you have a number and want to know what it is before you look for a ship, the lookup tools take one identifier each and explain it:
- MMSI lookup — what kind of station a nine-digit number belongs to (a ship, a coast station, an aid to navigation, a search-and-rescue beacon), which country issued it, and the vessel, if we have heard it.
- IMO number lookup — whether the check digit is right, which catches most typing mistakes, and the vessel that broadcasts that IMO number.
- Call sign lookup — the vessels we have heard using a call sign.
- UN/LOCODE lookup — the port behind a five-character location code such as a destination you have seen broadcast.
The MMSI and MID guide and the IMO number guide explain how those numbers are built.
Browsing: ports, flags, ship types and waterways
Sometimes you do not know the ship, only where she is going or what she is. Then browse instead:
- By port. The port directory leads to a page for each port listing the vessels in port now, the vessels under way that declare it as their destination, and recent arrivals and departures. If you know a ship is due somewhere, her name is probably among that port’s expected arrivals (see reading a port page).
- By flag. The flags pages group the vessels we receive by the country that issued their MMSI.
- By type. The ship types pages list tankers, cargo ships, passenger ships, tugs, fishing vessels and the rest, as their transponders describe them.
- By area. The waterways pages show what we are receiving in busy straits and canals.
On the map itself, the filters narrow the view by ship type, status, flag, speed and destination, and a filtered view can be shared as a link (see search and filters).
Finding a ship that is at sea
A ship in mid-ocean is usually beyond the range of any shore receiver, so a tracker fed by terrestrial AIS shows where she was last heard, with its age, until she nears land again. Following ships across open ocean needs satellite AIS, a separate source of data. For what this site receives, see what VesselTrack receives.
You can still work out roughly where she is. Her vessel page shows the last position, the speed and course she was making, and the destination and ETA her crew entered. A ship last heard leaving Rotterdam at 14 knots for a port on the other side of the Atlantic is somewhere along that route; her destination’s port page will list her as expected, and she will reappear on the map when she comes within range of the far coast. The guide to disappearing ships sets out how to read a silence.
When a ship does not turn up
If a search finds nothing, the reason is usually one of these:
- We have not heard her. A vessel appears only after a receiver feeding our data has picked up her transmissions. A ship that has spent our whole collection period out of range of those receivers is not in our records.
- She is a small craft. Yachts and small fishing boats often carry no AIS, or a Class B set that is heard over shorter distances and sends less (see Class A vs Class B). We receive Class B sets too, but they are heard less reliably than ships, and a boat with no AIS never appears.
- The name is spelt differently. AIS names have no accents and are cut at 20 characters, and prefixes such as “MV” are usually not part of them. Try part of the name, or a number.
- She has a new identity. After a sale and change of flag the MMSI, call sign and often the name change. The IMO number does not, so search for that.
- Her transponder is mis-programmed. Sets are sometimes left with a placeholder MMSI or another ship’s number; the US Coast Guard lists examples such as 111111111 and 123456789.
- You have a shipment number, not a ship. Container numbers, bookings and bills of lading are not in AIS at all. The container tracking guide explains how to get from those to the ship.
Sources
Statements about AIS and maritime standards on this page were checked against the following. Statements about what VesselTrack does describe the software as it runs today.
- International Maritime Organization — IMO identification number schemesWhat an IMO number is, which ships get one, who assigns it, and that it is never reassigned.
- US Coast Guard Navigation Center — Maritime Mobile Service IdentityWhat an MMSI is for and who regulates it.
- US Coast Guard Navigation Center — Class A AIS position report and static/voyage dataField-by-field contents of AIS messages 1, 2, 3 and 5, reproduced from Recommendation ITU-R M.1371-5: navigational status codes, ship-type codes, “not available” values.
- US Coast Guard Navigation Center — AIS frequently asked questionsWhy names arrive later than positions, invalid MMSIs, and that AIS is unencrypted and can be spoofed.
- ITU — Recommendation ITU-R M.585-10 (assignment and use of identities in the maritime mobile service)MMSI formats for ships, group calls, coast stations, SAR aircraft, aids to navigation, craft associated with a parent ship, and the 970/972/974 device prefixes.
Found a mistake? Email support@vesseltrack.net or see how to contact us. Corrections are made on this page and the review date is updated.